Today I’m going to show you how I painted my kitchen cabinets white during my kitchen makeover. It doesn’t cost a lot of money and makes a HUGE difference! I LOVE how they turned out!
So happy our kitchen is FINALLY done! YAY!! We knew moving into our house that we were going to get a nice tax refund, so we decided to put some in savings, and some into our house. The kitchen is where a lot of it went, and I can’t think of a better place I’d want it to go! :) It’s pretty much complete, and the only thing that is missing is a light to hang over my sink. I just can’t find one I like. It is so nice to have my house back to normal, and we are really enjoying our new kitchen. These pic’s aren’t the greatest.. but one day I’ll have a nice camera. :)
Wahoo our kitchen makeover is finally finished! In this post I am going to show you how to paint kitchen cabinets white.
So first things first…we took off the cabinet doors, and then emptied all of our cabinets and put everything in our room. Yikes…that was a big fat mess!
So I can’t say I did it all with out my hubby. My husband did all the dirty work such a sanding, drilling, and putting up the molding, etc. But I can say I did 100% of the painting! :)
So after my husband sanded the cupboards I vacuumed all the dust off, and then wiped them down with an all-purpose spray.
Here is Carson being a great helper! ;) Most the day he spent playing with our neighbors, so that was really nice!! Big thank you to Brit!
I think this was my least favorite part…
We put thumb tacks on the backs of the cupboards, so we could flip sides and paint A LOT faster. This way they rested on the thumbtacks instead of the ground. It actually worked out pretty well.
First coat of primer. I used kilz 2. I highly suggest buying a spray painter instead of using a brush. It’s about 50 bucks, and it looks a whole lot better! This is the paint sprayer we got, and it worked great.
My husband ripping off the old molding…while I’m outside painting. :)
First coat done!
Sanded all the boards… then cleaned them of course.
We made plenty of trips to Home Depot and Lowes… Good thing they are both 1/2 mile from our house. We had our 10% move-in coupon as well, which made it even better!
I think this was the toughest part. My husband and I have never done a project this big, and really don’t know that much about remodeling. However we thought, “How hard can it be?” Cut the molding…then glue. Well on a straight angle that might be the case but not when you have a 63 degree angle. It may have been a little easier if we had more then just a plain miter box…but we didn’t so we made it work. Luckily my husband is smart at math and we have a nice neighbor that helped and who has done crown molding, so it actually turned out good!
First coat of paint in kitchen…with the brush. Bad mistake. Ever wonder how to paint white kitchen cabinets? Read on…
First things first- get a paint sprayer!! It made my life a whole lot easier! Especially since I did 4 coats of paint total….yes they were pretty thin coats! haha. BTW in between in each coat of paint I lightly sanded (I use 300 grit paper) each layer and then wiped it all down again. It better last now! haha.
So after we saw the results with the spray painter, we realized we needed to tape everything up and spray the kitchen down. Who knew taping took SOOOOO long. It really did. But I am so glad we did, because the spray paint looks sooo much cleaner and professional.
All the molding and bead board is up!
I really love the bead board! It makes such a difference! Especially for only 40 bucks!
So here she is all done and WHITE! She’s just missing something…
Oh yes the hardware! I love the black hardware!
AND…the black granite. We actually ended up spending ALOT less on our kitchen then we thought and decided to go for it. We found a really cheap guy on craiglist, that I was a little nervous about, but I’m sooo happy with the way it looks. They did a really good job!! It pays to get a lot of differnent bids.
I also loooove the under mount sink. It’s so nice to just wipe things straight into the sink. You can find great deals on sinks and hardware on ebay FYI.
Here is my hot hubby playing Mr. Plumber. He thinks he can figure everything out on his own…and he usually can. I’m glad I have a handy husband, even if that means getting a few broken things, while he’s figuring it out. ;)
Cooking in my new kitchen!
Here’s a close up on the trim. This was the 63 degree angle I was talking about. :)
Here’s a close up on the bead board and trim.
Bead board and baseboard added around the island.
So after 4 long days she is beautiful! I can’t say I’d want to do it again, but it is definitely SOOOO worth it!
I will be participating in some of these link parties
UPDATED INFO
*edited to add* I had a few questions so I’ll add them onto this post for future reference.
-I used this paint sprayer. I also did have to thin my paint. Follow the directions and do the paint test. Also in b/w each coat clean out with water and clean with thumbtack or needle so it doesn’t glob. Also in between each coat I put a new sheet of plastic down to keep my cabinets dust and paint free.
total cost to paint, add molding and hardware= around $250 ….NOT bad!!
-I used a ultra pure white latex paint… buy the PREMIUM brand. I like when it has the paint and primer in one.
Recent Kitchen Posts:
Jamielyn Nye
Creative director and founder of I Heart Naptime. Jamielyn aspires to reach women, get their creative juices flowing, and to genuinely inspire. When she’s not creating, Jamielyn loves to chase her three little monkeys and snuggle up on the couch with her man.
Original article and pictures take www.iheartnaptime.net site
Комментариев нет:
Отправить комментарий